Quick answer

HDR10 is a signal format: the way a PC, console or player sends HDR to a display, built on the PQ curve from SMPTE ST 2084. DisplayHDR 400, 600, 1000 and the True Black tiers are VESA certifications a display earns by passing measured tests, so “HDR10 vs HDR400” compares a signal with a grade. Under VESA’s current CTS 1.2 rules, a DisplayHDR 400 badge means at least 400 cd/m² on VESA’s 8% patch test, 90% DCI-P3 coverage and HDR10 input, but no local dimming is required.

Contents

Provenance

  • Nov 18, 2026Published

HDR10 is a signal format: it’s how a graphics card, console or player tells a display that a picture is HDR and how bright each part of it should be. DisplayHDR 400, 600, 1000 and the True Black tiers are VESA certification levels a display has to pass in measured tests, so “HDR10 vs HDR400” compares a way of sending a picture with a grade for showing one.

A genuine badge promises that the display passed every test in its tier’s column of VESA’s table below, and VESA says every tier requires HDR10 support. It doesn’t promise local dimming at the 400 level, because VESA doesn’t require it there. It doesn’t tell you whether a 400 badge was earned under the current CTS 1.2 rules or the looser CTS 1.1 ones. And a box that says “HDR400” or “HDR10 support” without VESA’s DisplayHDR name isn’t a VESA certification at all.

If you already have an HDR display and want the Windows switches, that’s my HDR on or off page. This one is about what the labels mean.

HDR10 is the signal; DisplayHDR is the test

VESA puts the difference plainly in its explainer “Not all HDR is created equal!”: HDR10 is the protocol that carries HDR from one device to another, such as a GPU to a display, and DisplayHDR requires that protocol and then adds front-of-screen performance tests. VESA’s home page says all DisplayHDR and DisplayHDR True Black tiers require HDR10.

What’s inside HDR10, from the standards side:

  • The PQ curve (SMPTE ST 2084). The 2014 SMPTE standard defines the electro-optical transfer function that the HDR10+ white paper calls the Perceptual Quantizer (“PQ”) transfer function. It maps code values to absolute luminance from 0 to 10,000 cd/m², and SMPTE says the mapping works with code values of as few as 10 bits. SMPTE also says real displays can depart from the curve because of their output limits. VESA’s luminance-accuracy test checks exactly that: whether a display follows the 2084 curve within set Delta-ITP limits.
  • A 10-bit signal with static metadata. The HDR10+ System Whitepaper (HDR10+ Technologies, September 4, 2019) describes HDR10 as the 10-bit PQ signal plus metadata that stays the same for a whole title: SMPTE ST 2086 for the mastering display’s minimum and maximum luminance and its chromaticities, and MaxCLL and MaxFALL, which it says are defined in CTA-861 and the Blu-ray standards.
  • HDR10+. The same white paper describes HDR10+ as HDR10 plus dynamic metadata sent per scene or even per frame, so a display can tone-map each scene separately. It calls HDR10+ royalty-free and says HDR10+ metadata can sit alongside HDR10 static metadata, which keeps the content playable on displays that don’t support HDR10+.
  • Dolby Vision. Dolby’s page for content creators describes Dolby Vision as carrying dynamic metadata, produced by a shot-by-shot analysis of an HDR master graded on the PQ curve, and says the same workflow can deliver HDR10 and SDR versions.

So “HDR10 support” on a spec sheet tells you the monitor can accept that signal. It doesn’t tell you how bright, how dark or how accurately the monitor shows it. VESA’s FAQ says much the same: HDR10 input is the minimum for PC HDR, and a display without the DisplayHDR logo may support HDR without performing noticeably differently from SDR.

The DisplayHDR tiers, from VESA’s own table

The table is VESA’s current summary of the DisplayHDR and DisplayHDR True Black requirements under CTS 1.2, the Compliance Test Specification VESA released on May 7, 2024. I transcribed it from VESA’s performance criteria page and checked it against VESA’s July 2026 summary PDF, both read on November 17, 2026. It includes the two True Black tiers VESA added after CTS 1.2 came out: True Black 1000 (announced December 30, 2024) and True Black 1400 (July 8, 2026).

TB means DisplayHDR True Black. Where VESA spans one value across several tiers, I’ve repeated it in each column. ✔ means VESA’s table applies that requirement to the tier, and N/A is VESA’s own entry. For the HDR-versus-SDR and black-crush rows VESA prints one requirement (CR(HDR) > 0.9 x CR(SDR); measure and view monotonically increasing luminance) across all ten columns, so I’ve put it in the row label and marked each tier ✔.

Test (VESA, CTS 1.2)40050060010001400TB 400TB 500TB 600TB 1000TB 1400
8% center patch, 2% APL background: minimum luminance (cd/m²)4005006001000140040050060010001400
Full-screen flash: minimum luminance (cd/m²)40050060010001400250300350500700
Full-screen long-duration: minimum luminance (cd/m²)320320350600900250300350500700
Black level, dual corner box, screen center: maximum luminance (cd/m²)0.40.10.10.050.020.00050.00050.00050.00050.0005
Dual corner box, both white corners: minimum luminance (cd/m²)30037545075010503003754507501050
Active dimming, maximum white to black of a 50 cd/m² checkerboard (stops)1111.6121313.5N/AN/AN/AN/AN/A
Active dimming, maximum white to black of a 5 cd/m² checkerboard (stops)1212.6131414.5N/AN/AN/AN/AN/A
Checkerboard, max black level at full luminance (True Black only)N/AN/AN/AN/AN/A0.0005 cd/m²0.0005 cd/m²0.0005 cd/m²0.0005 cd/m²0.0005 cd/m²
ITU-R BT.709 coverage, 10% and full-screen color patches99%99%99%99%99%99%99%99%99%99%
DCI-P3 (D65) coverage, 10% and full-screen color patches90%95%95%95%95%95%95%95%95%95%
Additive RGB color luminance, 10% color patch (cd/m²)4005006001000140040050060010001400
Additive RGB color luminance, full-screen color test (cd/m²)320320350600900250300350500750
10-bit video signal, per channel✔✔✔✔✔✔✔✔✔✔
Minimum driver-IC bit depth (+2b dithering)8b+28b+28b+28b+28b+28b+28b+28b+28b+28b+2
Minimum 8-bit digital-to-analog conversion✔✔✔✔✔✔✔✔✔✔
Backlight control 8-bit accuracy✔✔✔✔✔N/AN/AN/AN/AN/A
Rise time: maximum frames from black to maximum luminance8888822222
Maximum Delta-ITP error, tests at 1 and 5 cd/m²20202020202020202020
Maximum Delta-ITP error, tests at 15 cd/m²15151515151515151515
Maximum Delta-ITP error, tested luminances at 50 cd/m² and above10101010101010101010
Static contrast ratio, 1D backlights (minimum)1,300 : 17,000 : 18,000 : 1N/AN/AN/AN/AN/AN/AN/A
Static contrast ratio, 2D backlights (minimum)N/AN/AN/A30,000 : 150,000 : 1N/AN/AN/AN/AN/A
Average ΔTP color error, 96 X-Rite colors at 50 and 100 cd/m² and 50% of tier8886688866
HDR vs SDR black level: CR(HDR) > 0.9 x CR(SDR)✔✔✔✔✔✔✔✔✔✔
Black crush: measure and view monotonically increasing luminance at 0, 0.05, 0.1, 0.3, 0.5 cd/m²✔✔✔✔✔✔✔✔✔✔
Subtitle flicker: maximum % difference in patch luminance, subtitle on vs off13131310101010101010

VESA still publishes the summary for the previous version, CTS 1.1 (released September 4, 2019), and the two differ most at the bottom tier. Under 1.1, DisplayHDR 400 had no DCI-P3 requirement (it needed 95% of BT.709) and an 8-bit driver minimum. Under 1.2 it needs 90% DCI-P3, 99% BT.709 and 8-bit plus 2-bit dithering. The 1.1 table also lists True Black at 400, 500 and 600 only. VESA’s 1.2 announcement adds the switch from a 10% white patch on black to an 8% patch on a non-black background, and the new tests for color accuracy, static contrast, HDR-versus-SDR black level, black crush and subtitle flicker.

VESA allowed monitors to be certified under CTS 1.1 through the end of May 2025, and its FAQ says a certification doesn’t expire. So a monitor on sale today with a DisplayHDR 400 logo may have passed either set of rules.

400 vs 600 vs 1000, read across the table

  • Brightness. The 8% patch minimum is the tier number: 400, 600 and 1000 cd/m². Held full screen in the long-duration test, the minimums are 320, 350 and 600.
  • Black level. The maximum black in the corner-box test drops from 0.4 to 0.1 to 0.05 cd/m².
  • Color. 90% DCI-P3 at 400, then 95% at 600 and 1000. Average ΔTP color error must stay at 8 or less at 400 and 600, and 6 or less at 1000.
  • Contrast and dimming. The static contrast minimum is 1,300:1 at 400 and 8,000:1 at 600 (both in the 1D backlight row), and 30,000:1 at 1000 (the 2D backlight row). VESA’s notes under the table spell out the hardware: 500 and 600 need 1D local dimming or better, 1000 and above need 2D local dimming or better, and 400 can pass either with a much higher native panel contrast than CTS 1.1 asked for or with 1D local dimming.

Bit depth, rise time and the white-point (Delta-ITP) limits are the same at all three.

What VESA says each tier is for

VESA’s home page describes the tiers as visible, meaningful performance levels tied to specific uses. Its FAQ, which carries no date, and its press releases say which uses:

  • Gaming. The FAQ says higher tiers are always better for games, because games build their picture on the fly instead of being mastered to a fixed brightness. It singles out the step from 400 to 500: a wider color gamut, and 500 is the first tier that requires local dimming, which 400 doesn’t. In the CTS 1.2 table that gamut step is 90% to 95% DCI-P3.
  • True Black 400 and 500. The same FAQ answer says those tiers bring the wider gamut, higher contrast, detailed blacks and fast rise time to gaming.
  • Content creation. The FAQ calls 1000 the practical minimum for grading HDR video, since 1000 cd/m² is one of the two common mastering levels. It says 1400 exists because a 1000 display only has to hold 600 cd/m² full screen, while 1400 must hold 900, enough to keep showing a full-screen flash while an editor pauses on it.
  • True Black 600, 1000 and 1400. VESA’s September 2, 2021 release says True Black 600 requires 20 percent more luminance than True Black 500. Its December 30, 2024 release added True Black 1000 for OLED displays aimed at professional video work. Its July 8, 2026 release added True Black 1400 for professional HDR grading and premium viewing, brighter rooms included, and credits tandem OLED panels for the jump.

Microsoft’s “What is HDR in Windows?” page gives the buyer’s version: it recommends displays certified to DisplayHDR version 1.2, at the 500 tier or higher.

What the test labs say about the low tiers

  • TFTCentral, March 18, 2019 (Simon Baker). Writing about the original rules, TFTCentral called the DisplayHDR 400 badge misleading. Its list of what the tier needed then was 400 cd/m² peak brightness, global dimming, 95% of BT.709 and true 8-bit color, and its view was that this gave no real dynamic-range gain over an ordinary monitor.
  • TFTCentral, May 7, 2024 (Simon Baker). On CTS 1.2, TFTCentral welcomed the changes to the 400 tier: 10-bit support, at least 90% DCI-P3, and a 1,300:1 static contrast floor it expects to shut out most IPS and TN panels. It noted the tier still requires no local dimming, and its view is that real HDR dimming hardware now starts at the 1000 tier. It also pointed out that VESA kept the badge names, so a DisplayHDR 400 logo doesn’t show which CTS it was tested under, while VESA’s certified list does.
  • RTINGS, brightness test methodology (Nicholas Di Giovanni, updated July 3, 2024). RTINGS measures HDR brightness itself with an HDR real-scene clip. It treats more than 600 cd/m² as good enough for HDR gaming and at least 1,000 cd/m² as best for a cinematic HDR experience. It also says LED-backlit monitors, Mini LED ones especially, can get much brighter than OLEDs, while OLEDs make small highlights pop and often have aggressive automatic brightness limiting. RTINGS’s real-scene clip isn’t VESA’s 8% patch, so its figures and VESA’s thresholds aren’t the same measurement.

I haven’t tested a DisplayHDR 400 monitor, so there’s no picture-quality verdict of my own here.

Why OLED monitors carry True Black badges

VESA runs two specifications. Its home page says DisplayHDR is for LCDs and DisplayHDR True Black is for OLED and other emissive displays. True Black arrived in January 2019, about a year after DisplayHDR 1.0 (December 2017), and VESA describes it as optimized for emissive displays. Its FAQ explains the difference that matters here: an OLED has no backlight, and each pixel makes its own light.

That’s why the True Black columns in the table look different:

  • The backlight tests don’t apply. Active dimming, backlight control accuracy and both static contrast rows are N/A for True Black.
  • Black level. The limit is 0.0005 cd/m² at every True Black tier, against 0.4 down to 0.02 for the LCD tiers, plus an extra checkerboard black test at the same 0.0005.
  • Rise time. 2 frames from black to full brightness, against 8 for the LCD tiers.
  • Full-screen brightness. The minimums are lower. True Black 400 needs 250 cd/m² in both full-screen tests; DisplayHDR 400 needs 400 on the flash and 320 on the long test.

So DisplayHDR 400 and True Black 400 share the 400 cd/m² patch figure and not much else. VESA’s FAQ still says OLED can’t currently get as bright as LCD, while its July 2026 release credits tandem OLED for reaching the 1400 tier. If you’re weighing an OLED TV instead of an OLED monitor, the OLED TV as a PC monitor page covers the desk side of that choice.

My FO48U: what Gigabyte lists, and what VESA’s list shows

My display is a Gigabyte AORUS FO48U, a 48-inch-class 4K 120 Hz OLED; my FO48U review has the full story. On November 17, 2026, Gigabyte’s specification page listed HDR Support: Yes (HDR10 / HLG), Display Colors 10 bits, Color Saturation 98% DCI-P3 / 130% sRGB, Brightness 130-150 cd/m² (typical) and 800-900 cd/m² (@3% peak), and a typical contrast ratio of 135000:1. Neither the specification page nor the Key Features page names a DisplayHDR or DisplayHDR True Black tier. Gigabyte’s 3% peak figure is its own specification, not a result from VESA’s 8% patch test.

VESA’s certified-products list doesn’t give the FO48U a row of its own. The model name appears only in the Family Models field of two other Gigabyte entries: the AORUS FV43U, listed under DisplayHDR 1000, and the M28U, listed under DisplayHDR 400, both marked CTS 1.1. It isn’t in any True Black section. Gigabyte doesn’t claim a tier, and the two rows that mention the FO48U sit under different tiers, so I’m not reading a certification into either of them. What Gigabyte states is HDR10 and HLG support.

What I can say first-hand is what my review already records. The on-screen menu screenshots from June 10, 2026 show 3840 x 2160 at 120 Hz over DisplayPort, the HDR Vivid picture mode, Brightness 100, Contrast 55, FreeSync Premium on, and Gamma set to ST2084, the number of the SMPTE PQ standard above. In that review I also said its HDR brightness is a touch behind the LG, and that I’ve never noticed it gaming in a dim room. This page carries no luminance measurement of the FO48U.

How to find a monitor’s real tier

  1. Look the model up on VESA’s list. VESA’s certified products page is sorted by tier, from DisplayHDR 1400 down to True Black 400, and each entry gives the model, any family models and the CTS version it was certified under. VESA notes the list only includes products its members have announced and approved for listing, so a missing model isn’t proof that it’s uncertified. A listing with its CTS version is the check VESA itself points buyers to.
  2. Read the exact wording. VESA’s FAQ says a tier logo on a product must include its number. Its home page says a monitor that claims HDR support without a DisplayHDR performance specification, or uses pseudo-specs like “HDR-400” instead of “DisplayHDR 400”, probably doesn’t meet the certification requirements. VESA also warns that its logo has been used on displays that don’t qualify, and that tiers that don’t exist have been made up.
  3. Check the CTS version. Microsoft recommends version 1.2 certified displays. A CTS 1.1 listing passed the older rules in the 1.1 summary.
  4. Ask Windows. Microsoft says Settings > System > Display > Advanced display shows the display’s HDR certification, and that “Not found” can mean the display has none or that its maker hasn’t published it.
  5. Treat “HDR10 support” as a signal feature. Microsoft lists HDR10 support as the minimum for HDR on an external display in Windows. It isn’t a performance tier.

10-bit color sends more data per pixel than 8-bit, so the same resolution and refresh rate need more link bandwidth. The site’s DisplayPort and HDMI bandwidth calculator multiplies total pixels per frame (from VESA CVT-RBv2 timing) by the refresh rate and the bits per pixel, which is the color depth across three channels, adjusted for chroma subsampling.

One example, calculated with that tool for my monitor’s 4K 120 Hz mode at full 4:4:4 chroma: 25.8 Gbps at 8-bit, which fits DisplayPort 1.4’s 25.92 Gbps effective rate, and 32.3 Gbps at 10-bit, which the calculator marks as needing DSC on DisplayPort 1.4 and as fitting a full-rate HDMI 2.1 link (42.60 Gbps in the tool) uncompressed. Those are calculated estimates, not a reading of my own link.

The FO48U’s spec page adds a caveat. Gigabyte lists its DisplayPort 1.4 input as DSC and its two HDMI 2.1 ports as supporting 4K 120Hz 4:4:4 with DSC enabled, or 4K 120Hz 4:2:0. It doesn’t give the HDMI link rate, so on this monitor the HDMI 2.1 label doesn’t by itself mean the full-rate case the calculator models. Check your own monitor’s input table before assuming a 10-bit mode runs uncompressed.

Related: which port carries which mode is in HDMI vs DisplayPort for a gaming monitor, and what refresh rate changes is in 60Hz vs 144Hz vs 240Hz.

Sources

Frequently asked questions

What is the difference between HDR10 and HDR400?
HDR10 is a signal format: the PQ transfer curve from SMPTE ST 2084, a 10-bit signal and static metadata, used to send HDR from a PC, console or player to a display. DisplayHDR 400 is a VESA certification tier a display earns by passing measured tests. VESA says every DisplayHDR tier requires HDR10, so a certified DisplayHDR 400 monitor accepts HDR10, but a monitor that accepts HDR10 isn’t necessarily certified.
What is HDR400?
Usually shorthand for VESA DisplayHDR 400, the entry tier for LCDs. Under the current CTS 1.2 rules it requires at least 400 cd/m² on an 8% center patch, 320 cd/m² full screen in the long-duration test, a black level no higher than 0.4 cd/m² in the corner-box test, 90% DCI-P3, a 10-bit video signal and a 1,300:1 static contrast ratio. Local dimming is not required. VESA says a product that uses a pseudo-spec like HDR-400 instead of DisplayHDR 400 probably doesn’t meet its certification requirements.
What is HDR on a monitor?
VESA’s FAQ describes HDR as using a wider range of luminance, from bright white to dark black, so a display can keep the same average brightness while widening the range of colors and improving contrast. For a PC monitor it says to look for two things: HDR10 input, the minimum for PC HDR, and the DisplayHDR logo, which shows the certified performance tier.
HDR400 vs HDR600: what is the difference?
In VESA’s CTS 1.2 table, DisplayHDR 600 raises the 8% patch and full-screen flash minimums from 400 to 600 cd/m² and the long-duration full-screen minimum from 320 to 350, lowers the maximum black from 0.4 to 0.1 cd/m², raises DCI-P3 coverage from 90% to 95% and raises static contrast from 1,300:1 to 8,000:1. VESA says the 500 and 600 tiers need 1D local dimming or better; the 400 tier does not require local dimming.
Is DisplayHDR True Black 400 the same as DisplayHDR 400?
No. True Black is VESA’s specification for OLED and other emissive displays. Both need 400 cd/m² on the 8% patch, but True Black 400 sets a maximum black of 0.0005 cd/m² instead of 0.4, a 2-frame rise time instead of 8, 95% DCI-P3 instead of 90%, and lower full-screen minimums: 250 cd/m² for both full-screen tests, against 400 (flash) and 320 (long duration) for DisplayHDR 400. The backlight tests are N/A for True Black.
Do I need a DisplayHDR badge to use HDR in Windows?
No. Microsoft’s requirement for an external display is HDR10 support over DisplayPort 1.4, HDMI 2.0 or higher, USB-C or Thunderbolt. Microsoft recommends certified displays, specifically DisplayHDR version 1.2 at the 500 tier or higher. The Windows switches are on my HDR on or off page.
How do I check if a monitor is really DisplayHDR certified?
Search VESA’s certified products list, which gives each entry’s tier, family models and CTS version. VESA notes the list only includes products its members have announced and approved for listing. In Windows, Microsoft says Settings > System > Display > Advanced display shows the HDR certification, and that Not found can mean the display has none or its maker hasn’t published one.
Is DisplayHDR 400 worth it?
I haven’t tested a DisplayHDR 400 monitor, so I’ll give you what the sources say. VESA’s FAQ says higher tiers are always better for gaming and that 500 is the first tier requiring local dimming. Microsoft recommends 500 or higher. TFTCentral welcomed the 2024 changes to the 400 tier but still wants every tier to require local dimming. If you’re comparing two 400 monitors, check which CTS version each was certified under.

Sources and corrections

Last updated
Methodology
See our methodology for research and review standards. It draws on 20 cited sources, listed below, each checked against the original page on 2026-11-17. Every VESA page below was opened on the evening of November 17, 2026, US Central time (November 18 UTC). The tier table is transcribed cell by cell from the HTML table on displayhdr.org/performance-criteria/, headed Summary of DisplayHDR Specs under CTS 1.2, and checked against VESA’s July 2026 summary PDF linked from that page. Where VESA’s table spans one value across several tiers, the value is repeated in each tier column; N/A is VESA’s own entry; ✔ marks a requirement VESA’s table applies to that tier. Every cell in the table has a value on VESA’s summary, so none needed a not-stated marker. The CTS 1.1 comparison comes from VESA’s own CTS 1.1 summary page. The FO48U statements come from Gigabyte’s specification and Key Features pages, read in a web browser on the same date, and from a text search for FO48U across every tier section of VESA’s certified-products page. First-hand settings are only those recorded in my FO48U review from its June 10, 2026 OSD screenshots; I took no measurements for this page. The bandwidth example was run on the site’s live DisplayPort and HDMI bandwidth calculator with 3840 x 2160, 120 Hz, 4:4:4 chroma, at 8-bit and 10-bit.
Sources
Corrections
Spotted an error? Email a correction with the affected line and what you found. The draft includes this page’s address. Verified changes are recorded here. Contact details.

About the author

I am Lowell K. Wood IV. I research, write and maintain everything on TechFuelHQ from St. Louis County, Missouri.