For a gaming PC and monitor, use DisplayPort, and switch to HDMI 2.1 only when your mode needs DSC on your DisplayPort link but fits uncompressed on full-speed HDMI 2.1 at both the card and the monitor. Consoles and TVs are HDMI-only. HDMI 2.0 has no DSC, and by this site’s calculator it manages 1440p 144Hz and 1080p 240Hz at 8-bit color only, with very little room to spare.
Provenance
- Nov 18, 2026Published
Use DisplayPort to connect a gaming PC to a monitor, and switch to HDMI 2.1 only when your mode needs compression on your DisplayPort link but fits uncompressed on a full-speed HDMI 2.1 port at both the graphics card and the monitor. The connector shape doesn’t decide it; the link rate both ends support does, and the table below shows which link carries each common gaming mode uncompressed, which needs Display Stream Compression (DSC), and which can’t carry it at all.
Every rate in the table is calculated, not measured. It comes from this site’s DisplayPort and HDMI bandwidth calculator, run on VESA CVT reduced-blanking v2 timing with full RGB (4:4:4) color, at 8-bit (SDR) and 10-bit (HDR). The “Needs” column is that calculated uncompressed rate. The link ceilings it is compared against, and where each comes from, are in the second table.
Which port carries which mode
| Mode | Needs | HDMI 2.0 | HDMI 2.1 | DP 1.4 | DP 2.1 UHBR10 | DP 2.1 UHBR13.5 | DP 2.1 UHBR20 |
|---|---|---|---|---|---|---|---|
| 1080p 240Hz, 8-bit | 14.0 Gbps | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed |
| 1080p 240Hz, 10-bit | 17.5 Gbps | does not fit | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed |
| 1440p 144Hz, 8-bit | 14.1 Gbps | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed |
| 1440p 144Hz, 10-bit | 17.6 Gbps | does not fit | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed |
| 1440p 240Hz, 8-bit | 24.6 Gbps | does not fit | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed |
| 1440p 240Hz, 10-bit | 30.8 Gbps | does not fit | fits uncompressed | needs DSC | fits uncompressed | fits uncompressed | fits uncompressed |
| 4K 60Hz, 8-bit | 12.5 Gbps | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed |
| 4K 60Hz, 10-bit | 15.7 Gbps | does not fit | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed |
| 4K 120Hz, 8-bit | 25.8 Gbps | does not fit | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed |
| 4K 120Hz, 10-bit | 32.3 Gbps | does not fit | fits uncompressed | needs DSC | fits uncompressed | fits uncompressed | fits uncompressed |
| 4K 144Hz, 8-bit | 31.3 Gbps | does not fit | fits uncompressed | needs DSC | fits uncompressed | fits uncompressed | fits uncompressed |
| 4K 144Hz, 10-bit | 39.2 Gbps | does not fit | fits uncompressed | needs DSC | needs DSC | fits uncompressed | fits uncompressed |
| 4K 240Hz, 8-bit | 54.8 Gbps | does not fit | needs DSC | needs DSC | needs DSC | needs DSC | fits uncompressed |
| 4K 240Hz, 10-bit | 68.6 Gbps | does not fit | needs DSC | needs DSC | needs DSC | needs DSC | fits uncompressed |
| 3440 x 1440 144Hz, 8-bit | 18.8 Gbps | does not fit | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed |
| 3440 x 1440 144Hz, 10-bit | 23.5 Gbps | does not fit | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed |
| 3440 x 1440 175Hz, 8-bit | 23.2 Gbps | does not fit | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed | fits uncompressed |
| 3440 x 1440 175Hz, 10-bit | 29.0 Gbps | does not fit | fits uncompressed | needs DSC | fits uncompressed | fits uncompressed | fits uncompressed |
| 3440 x 1440 240Hz, 8-bit | 32.8 Gbps | does not fit | fits uncompressed | needs DSC | fits uncompressed | fits uncompressed | fits uncompressed |
| 3440 x 1440 240Hz, 10-bit | 41.0 Gbps | does not fit | fits uncompressed | needs DSC | needs DSC | fits uncompressed | fits uncompressed |
Every “needs DSC” cell fits once compressed. At 8 bits per pixel, the DSC rate VESA lists, the largest compressed figure in the table is 18.3 Gbps, for 4K 240Hz, which is under DisplayPort 1.4’s 25.92 Gbps. HDMI 2.0 has no “needs DSC” cells because it has no DSC, which the DSC section below explains. For 4K 240Hz specifically, the 4K 240Hz GPU and DSC guide covers what compression costs and which cards drive it.
A table cell is only true when both ends support that link at that rate. A “DisplayPort 2.1” card and a “DisplayPort 2.1” monitor meet at the lower of their two UHBR rates, and the same goes for HDMI 2.1.
Close calls
Five cells sit within about 5% of a ceiling. Each result depends on the calculator’s stated assumptions: CVT-RBv2 timing, the coding-overhead ceilings in the second table, and DSC at 8 bits per pixel. The calculator’s own notes say real numbers vary with the exact timing your GPU and monitor negotiate, so real hardware can negotiate differently and land on the other side:
- 4K 120Hz, 8-bit on DisplayPort 1.4: 25.82 Gbps against 25.92, 0.4% headroom.
- 1440p 144Hz, 8-bit on HDMI 2.0: 14.08 Gbps against 14.4, 2.2% headroom.
- 1080p 240Hz, 8-bit on HDMI 2.0: 14.00 Gbps against 14.4, 2.8% headroom.
- 3440x1440 240Hz, 10-bit on HDMI 2.1: 41.03 Gbps against 42.6, 3.7% headroom.
- 4K 144Hz, 10-bit on UHBR10: 39.19 Gbps against 38.69, 1.3% over, so it needs DSC.
Two more sit just outside that 5%: 1440p 240Hz, 8-bit on DisplayPort 1.4 (24.62 Gbps against 25.92, 5.0% headroom) and 4K 240Hz, 8-bit on UHBR13.5 (54.85 Gbps against 52.22, 5.0% over, so it needs DSC).
Where the link ceilings come from
| Link | Total rate, from the standards body | Ceiling the table uses | Where that ceiling comes from |
|---|---|---|---|
| HDMI 2.0 | Up to 18 Gbps (HDMI Forum) | 14.4 Gbps | The calculator: 18 Gbps less 8b/10b coding. HDMI publishes no payload figure. |
| HDMI 2.1 | Up to 48 Gbps (HDMI Forum) | 42.6 Gbps | The calculator: 48 x 16/18 = 42.67, entered as 42.6. HDMI publishes no payload figure. |
| DisplayPort 1.4 (HBR3) | 4 lanes x 8.1 = 32.4 Gbps (VESA) | 25.92 Gbps | VESA’s published maximum payload after 8b/10b coding. |
| DisplayPort 2.1 UHBR10 | 4 lanes x 10 = 40 Gbps (VESA) | 38.69 Gbps | The calculator: 40 Gbps scaled by VESA’s UHBR20 payload ratio (77.37/80). |
| DisplayPort 2.1 UHBR13.5 | 4 lanes x 13.5 = 54 Gbps (VESA) | 52.22 Gbps | The calculator: 54 Gbps scaled the same way. |
| DisplayPort 2.1 UHBR20 | 4 lanes x 20 = 80 Gbps (VESA) | 77.37 Gbps | VESA’s published maximum payload with 128b/132b coding. |
VESA states two of these ceilings outright: DisplayPort 1.4a’s 32.4 Gbps link has a maximum payload of 25.92 Gbps after 8b/10b coding, and DisplayPort 2.0’s 20 Gbps lanes with 128b/132b coding have a maximum payload of 77.37 Gbps. For UHBR10 and UHBR13.5, VESA gives the 40 and 54 Gbps totals (through its DP40, DP54 and DP80 cable announcements) and says UHBR coding has “only 3% overhead”, but publishes no payload number. The calculator scales them by the UHBR20 ratio. Using 97% of 40 and 54 instead changes no cell in the table.
HDMI is the bigger gap. The HDMI Forum’s own releases give HDMI 2.0 “up to 18Gbps” and HDMI 2.1 “up to 48Gbps”. hdmi.org’s FAQ says the uncompressed modes above 4K 60Hz need Fixed Rate Link (FRL), which replaces TMDS, and its blog post lists TMDS and 18Gbps as HDMI 2.0 features. Neither site, in the pages I read, publishes the coding overhead or a payload figure. The 14.4 and 42.6 Gbps ceilings are the calculator’s own deductions. For HDMI 2.1 it makes no difference: no cell changes whether you use 42.6, 42.67 or the full 48. For HDMI 2.0 it decides three cells: 1080p 240Hz, 1440p 144Hz and 4K 60Hz at 10-bit need 15.7 to 17.6 Gbps, which is over the calculator’s 14.4 but under the 18 Gbps total. I can’t point you to an HDMI page for that deduction, so treat those three as the calculator’s call rather than HDMI’s.
hdmi.org now leads with HDMI 2.2, at up to 96 Gbps. The calculator doesn’t model it, so it isn’t in the table.
Why I start with DisplayPort on a PC
Every mode in the table runs on both DisplayPort 1.4 and HDMI 2.1, with DSC where marked. Three things tip it toward DisplayPort when a PC and a monitor both have each port.
Variable refresh on NVIDIA cards. NVIDIA’s support articles (last updated in 2021) say G-SYNC Compatible works over DisplayPort from the GTX 10 series on, with the monitor set to DisplayPort 1.2a or newer. Over HDMI, it needs a GTX 16 or RTX 20 series card or newer and a display that supports VRR over HDMI 2.1, and NVIDIA says it can’t guarantee VRR on displays it hasn’t validated.
Port count. NVIDIA lists three DisplayPort outputs and one HDMI for the RTX 5080 Founders Edition or reference design.
“HDMI 2.1” on a box is not a bandwidth. hdmi.org says every HDMI 2.1 feature is optional, and that a product can claim HDMI 2.1 compliance while supporting only HDMI 2.0 features such as TMDS and 18 Gbps, without FRL or 48 Gbps. A maker that claims HDMI 2.1 has to list which 2.1 features the product supports. My own monitor is an example, further down.
DisplayPort’s label has the same problem at the top. VESA’s FAQ says it certifies DisplayPort 2.1b devices that don’t support any UHBR rate: the minimum is HBR2, DSC and at least one of several newer features, of which UHBR is only one. On either port, read the rate, not the version.
Display Stream Compression, and which versions carry it
DSC is VESA’s compression for display links. VESA calls it “visually lossless”, not lossless, and its FAQ explains that as a typical viewer, in typical conditions, in most cases not noticing a difference from the uncompressed picture. VESA’s codec page lists DSC at 8 bits per pixel: a 3:1 ratio for 24-bit color and 3.75:1 for 30-bit color. That 8 bpp figure is what the table’s “needs DSC” test uses, and a real link with room to spare may compress less.
- DisplayPort 1.4 was the first DisplayPort version to use DSC, according to VESA’s 2016 release. DisplayPort 2.1 makes DSC support mandatory.
- HDMI 2.1 carries DSC. VESA’s codec page lists HDMI 2.1 among the standards that adopt DSC 1.2a. hdmi.org’s FAQ, on its HDMI 2.2 specification page, says that specification incorporates VESA DSC 1.2a, and that FRL is required for compressed video transport.
- HDMI 2.0 has no DSC. That is my conclusion from hdmi.org’s wording, not a sentence it prints about HDMI 2.0: its blog post lists TMDS and 18Gbps as HDMI 2.0 features, without FRL, and its FAQ says FRL is required for compressed transport. A mode that doesn’t fit HDMI 2.0 uncompressed doesn’t fit it at all.
One naming wrinkle: VESA’s codec page now names DSC 1.2b as the version in DisplayPort and HDMI, while hdmi.org’s FAQ says DSC 1.2a. Both are VESA’s codec.
DSC on the spec sheet doesn’t tell you about its side effects, such as black screens on alt-tab or limits on NVIDIA’s downsampling features. The DSC section of the 4K 240Hz guide covers those, with its sources.
Variable refresh rate on each port
- HDMI: hdmi.org lists VRR as one of the HDMI 2.1b gaming features, alongside Auto Low Latency Mode and Quick Frame Transport. Because 2.1 features are optional, look for VRR by name on the monitor’s or TV’s spec sheet.
- DisplayPort: VESA’s FAQ says Adaptive-Sync has been supported since DisplayPort 1.2a, and that AMD’s FreeSync is based on it.
- AMD FreeSync: AMD says FreeSync works over both HDMI and DisplayPort.
- NVIDIA G-SYNC: DisplayPort from the GTX 10 series, HDMI 2.1 VRR from the GTX 16 and RTX 20 series, as above. NVIDIA’s RTX 5080 page lists Gaming VRR on its HDMI 2.1b output.
My FO48U review records FreeSync Premium switched on in the monitor’s menu while it runs over DisplayPort. To decide whether to use VRR, and where the switches are in Windows and the drivers, see variable refresh rate on or off.
Consoles and TVs: HDMI only
A console makes the choice for you. Sony’s specification for the 2023 PS5 models lists video out as supporting 4K 120Hz TVs, 8K TVs and VRR “specified by HDMI ver.2.1”, with no DisplayPort. Microsoft lists one HDMI 2.1 port on the Xbox Series X, with HDMI Variable Refresh Rate and AMD FreeSync among its HDMI features, and ships it with an Ultra High Speed HDMI cable. VESA’s own FAQ calls HDMI the de facto connection for home entertainment and says it’s used widely on HDTVs.
If one monitor has to serve both a PC and a console, the HDMI port’s own notes matter more than its version number. Gigabyte, for example, says the FO48U’s HDMI 2.1 ports run the PS5 and Xbox Series X at 4K 120Hz in 4:2:0. The table sticks to full 4:4:4 color. The calculator can estimate 4:2:2 and 4:2:0, and it marks 4:2:2 results as ones to confirm on both devices rather than guaranteed fits.
Cables: what Ultra High Speed, DP54 and DP80 mean
HDMI. hdmi.org’s Premium High Speed HDMI cable program tests cables at the full 18 Gbps, aimed at 4K 60Hz and HDR. The Ultra High Speed HDMI Cable came with HDMI 2.1, is for setups up to 48 Gbps, and is a Category 3 cable. Certification is mandatory and done at an HDMI Forum test center. A certified cable carries a label you can scan with a QR app, and the name is printed on the cable jacket. hdmi.org’s FAQ says an Ultra HDMI cable is necessary for 4K 120Hz and 8K 60Hz with HDR. The newer Ultra96 cable is for HDMI 2.2 at up to 96 Gbps.
DisplayPort. VESA certifies cables by the UHBR rate they carry. A DP80 cable supports up to UHBR20, four lanes, 80 Gbps. In January 2024 VESA replaced the DP40 cable spec (UHBR10, 40 Gbps) with DP54, which carries UHBR10 and UHBR13.5 (54 Gbps) over passive cables up to two meters. Before that, UHBR13.5 needed a DP80 cable. VESA also says DP40 cables already shipped were tested and meet the DP54 spec. Its FAQ adds DP80LL, an active cable that carries UHBR20 up to three meters.
Match the cable to the fastest link both ends support: DP80 for UHBR20, DP54 for UHBR13.5 or UHBR10, Ultra High Speed for HDMI 2.1.
Which port does my card and monitor have?
Read three things on each spec sheet: the version, the rate (the UHBR number for DisplayPort 2.x, or the largest mode it lists without DSC for HDMI 2.1), and any note tied to a specific mode. Here are three real sheets, read on November 17, 2026.
NVIDIA GeForce RTX 5080. NVIDIA’s page lists three DisplayPort outputs and one HDMI. The DisplayPort outputs are 2.1b with UHBR20, and the HDMI output is 2.1b. Both list up to 4K 480Hz with DSC, and the card’s maximum is 4K 480Hz or 8K 165Hz with DSC. Because UHBR20 is printed, the UHBR20 column applies whenever the monitor also has UHBR20. NVIDIA notes that these are Founders Edition or reference specs and that partner cards can differ, so check the exact model.
AMD Radeon RX 9070 XT. AMD’s product page lists DisplayPort 2.1a and HDMI 2.1b, and that’s all it says about outputs: no UHBR number and no port count. AMD’s launch release adds that the display engine supports resolutions up to 8K 144Hz with 12-bit HDR, still without a UHBR rate. Don’t read “DisplayPort 2.1a” as UHBR20. The 4K 240Hz guide covers which DisplayPort rate this card family uses, with its sources, and a board partner’s spec page is the place to confirm a specific card.
Gigabyte AORUS FO48U. This is the monitor I own and reviewed. Gigabyte’s spec page lists:
- Display port 1.4 (DSC), one port, and HBR3: Yes
- HDMI 2.1, two ports, each supporting “4K 120Hz 4:4:4 @ DSC enabled or 4K 120Hz 4:2:0”
- 10-bit display colors and a 120Hz maximum refresh rate
- A note that HDMI 2.1 supports the PS5 and Xbox Series X at 4K 120Hz in 4:2:0
Gigabyte’s February 2022 manual describes the HDMI ports as “2x HDMI 2.1 (6G + DSC only, no support for 6G and above)” and the DisplayPort as “1x DP1.4 (shares DSC with HDMI port)”. Its supported-timing list shows 3840x2160 at 120Hz on both HDMI and DisplayPort, and nothing above 120Hz.
Here’s how that reads against the table. 4K 120Hz at 10-bit is 32.3 Gbps calculated, which a full-speed HDMI 2.1 link carries uncompressed. Gigabyte says these HDMI ports need DSC for 4K 120Hz in full 4:4:4. My reading of that wording is that they don’t run at the full 48 Gbps rate, but that is my inference, not something Gigabyte states: it doesn’t print a rate for them, and the manual doesn’t define “6G”. On the DisplayPort 1.4 input, the same mode needs DSC at 10-bit, which Gigabyte lists on that port. At 8-bit it just fits uncompressed on the calculator’s numbers (25.8 against 25.92 Gbps, one of the close calls above). I run mine from my PC over DisplayPort at 3840x2160 and 120Hz, as the review records.
Quick answers
Does HDMI 2.0 support 144Hz?
Yes at 1080p, and at 1440p only with 8-bit color. By the calculator, 1080p 144Hz needs 8.0 Gbps at 8-bit and 10.0 Gbps at 10-bit, both well under HDMI 2.0’s 14.4. 1440p 144Hz needs 14.1 Gbps at 8-bit, so it fits, and 17.6 Gbps at 10-bit, so it doesn’t. 3440x1440 at 144Hz (18.8 Gbps at 8-bit) and 4K at 144Hz (31.3 Gbps at 8-bit) don’t fit, and HDMI 2.0 has no DSC to fall back on. Whether a given monitor offers 144Hz on its HDMI 2.0 input is still the monitor’s call, so check the supported-timing list in its manual.
Can HDMI 2.0 do 1440p 144Hz?
At 8-bit, yes, by about 0.3 Gbps: 14.08 Gbps against 14.4 under CVT-RBv2 timing. At 10-bit, no. For comparison, 1440p 120Hz at 8-bit is 11.6 Gbps, which fits comfortably, and 1440p 165Hz at 8-bit is 16.3 Gbps, which doesn’t fit.
Do I need DisplayPort for 240Hz?
No, if the card and the monitor both have a full-speed HDMI 2.1 port. HDMI 2.1 carries 1080p, 1440p and 3440x1440 at 240Hz uncompressed at both bit depths, which is better than DisplayPort 1.4 at 1440p 240Hz 10-bit and at 3440x1440 240Hz, where DisplayPort 1.4 needs DSC. At 4K 240Hz, both need DSC. HDMI 2.0 manages 240Hz only at 1080p and 8-bit, and that is a close call (14.00 Gbps against 14.4 on the calculator’s timing, so a real monitor may negotiate differently). Uncompressed 4K 240Hz needs UHBR20 at both ends. The catch is the monitor’s HDMI 2.1 port, which, as the FO48U shows, may not be full speed.
Is DisplayPort better than HDMI for gaming?
Version against version, not connector against connector. By the table’s ceilings, HDMI 2.1 (42.6 Gbps) carries more than DisplayPort 1.4 (25.92) and UHBR10 (38.69), and UHBR13.5 (52.22) and UHBR20 (77.37) carry more than HDMI 2.1. On a PC I still start with DisplayPort, for the variable-refresh and labeling reasons above. On a console or TV, it’s HDMI.
If the screen goes blank after you swap ports
A new port or cable can mean a new link to negotiate. If the monitor shows no signal after the change, start with the monitor no-signal guide. If Windows stops seeing a second screen, see Windows 11 not detecting a second monitor.
Related: what the refresh rate itself changes is in 60Hz vs 144Hz vs 240Hz, and what the HDR badges on a monitor’s box require is in DisplayHDR 400 vs 600 vs 1000.
How this page was made
I worked out each mode at 8-bit and 10-bit with the calculator’s method, and checked the results against the three worked examples on the calculator page (4K 144Hz 10-bit at 39.2 Gbps, 1440p 240Hz 8-bit at 24.6 Gbps, 4K 240Hz 10-bit at 68.6 Gbps). All three matched. Rates are shown to one decimal, as the tool shows them. The close calls are given to two decimals so you can see the margin. Each cell compares the calculated rate with the ceiling in the second table. The link totals come from VESA and the HDMI Forum, and the product details from NVIDIA, AMD, Gigabyte, Sony and Microsoft, all listed below with the date I read them. Nothing on this page was bench-tested.
Frequently asked questions
Is DisplayPort better than HDMI for gaming?
Does HDMI 2.0 support 144Hz?
Can HDMI 2.0 do 1440p 144Hz?
Do I need DisplayPort for 240Hz?
Does G-SYNC work over HDMI?
What cable does a DisplayPort 2.1 or HDMI 2.1 monitor need?
Sources and corrections
- Last updated
- Methodology
- See our methodology for research and review standards. It draws on 22 cited sources, listed below, each checked against the original page on 2026-11-17. Every data rate on this page is calculated, not measured. I worked out each mode with the method of the TechFuelHQ DisplayPort and HDMI bandwidth calculator: VESA CVT reduced-blanking v2 timing (80 horizontal blanking pixels per line, a 460 microsecond minimum vertical blanking interval), RGB 4:4:4 color at 8-bit and 10-bit, and DSC at the 8 bits per pixel that VESA’s codec page lists. A cell says fits uncompressed when the calculated rate is at or under the link’s payload ceiling, needs DSC when only the compressed rate fits and the link carries DSC, and does not fit otherwise. The DisplayPort 1.4 and UHBR20 ceilings are VESA’s published payload figures. The UHBR10 and UHBR13.5 ceilings are the calculator’s, scaled from VESA’s UHBR20 payload, because VESA publishes only their 40 and 54 Gbps totals. The HDMI 2.0 and 2.1 ceilings are the calculator’s, after 8b/10b and 16b/18b coding, because the HDMI Forum and hdmi.org publish only the 18 and 48 Gbps totals. The close calls depend on those assumptions and on the timing a real GPU and monitor negotiate, which can differ. Product specifications come from the NVIDIA, AMD, Gigabyte, Sony and Microsoft pages listed below. The only first-hand statement repeats my AORUS FO48U review. Nothing was bench-tested for this page.
- Sources
- VESA: DisplayPort 2.0 release (DP 1.4a 32.4 Gbps link and 25.92 Gbps payload; DP 2.0 128b/132b and 77.37 Gbps payload) accessed 2026-11-17
- VESA: DisplayPort 2.1 release (mandated DSC support, DP40 and DP80 cable rates) accessed 2026-11-17
- VESA: DisplayPort 2.1a release at CES 2024 (DP54 replaces DP40, UHBR13.5 over two-meter passive cables) accessed 2026-11-17
- VESA: DisplayPort 1.4 release (first DisplayPort version with DSC 1.2) accessed 2026-11-17
- VESA DisplayPort FAQ (UHBR coding overhead, DP 2.1b certification without UHBR, Adaptive-Sync, DSC definition, DP80LL cables) accessed 2026-11-17
- VESA: Display Compression Codecs (DSC ratios at 8 bits per pixel, DSC version, adopting standards) accessed 2026-11-17
- HDMI Forum: HDMI 2.0 specification release (up to 18 Gbps) accessed 2026-11-17
- HDMI Forum: HDMI 2.1 specification release (up to 48 Gbps, Ultra High Speed HDMI Cable) accessed 2026-11-17
- hdmi.org: specification overview and FAQ (now the HDMI 2.2 page; its FAQ covers DSC 1.2a, FRL and TMDS, Ultra cables, HDMI 2.1b gaming features) accessed 2026-11-17
- hdmi.org: What Does It Mean When Gear is Marketed as HDMI 2.1 Product? (February 6, 2022) accessed 2026-11-17
- hdmi.org: Ultra96 HDMI Cable and Ultra High Speed HDMI Cable accessed 2026-11-17
- hdmi.org: Premium HDMI Cable Certification Program (18 Gbps) accessed 2026-11-17
- AMD: FreeSync technology accessed 2026-11-17
- NVIDIA support: Do G-SYNC Compatible displays work on both DisplayPort and HDMI with GeForce GPUs? (updated 09/29/2021) accessed 2026-11-17
- NVIDIA support: What are the system requirements for G-SYNC Compatible display technology? (updated 09/29/2021) accessed 2026-11-17
- NVIDIA: GeForce RTX 5080 specifications (display connectors and maximum resolution) accessed 2026-11-17
- AMD: Radeon RX 9070 XT specifications (connectivity) accessed 2026-11-17
- AMD: RDNA 4 and Radeon RX 9000 series launch release (display engine) accessed 2026-11-17
- Gigabyte: AORUS FO48U specifications accessed 2026-11-17
- Gigabyte: AORUS FO48U user manual (English, February 2022), specifications and supported timing list accessed 2026-11-17
- PlayStation Blog: PS5 specifications for the 2023 model (video out) accessed 2026-11-17
- Xbox: Xbox Series X specifications (ports, HDMI features, included cable) accessed 2026-11-17
- Corrections
- Spotted an error? Email a correction with the affected line and what you found. The draft includes this page’s address. Verified changes are recorded here. Contact details.