Menu
Hardware
Homelab & NAS
Tools & Builders
Prices & Data
Troubleshoot

Open data

Compatibility Atlas

Motherboard pages built from the maker's own manual: which M.2, PCIe and SATA slots share lanes, what gets disabled, and the page each statement is on.

Boards covered

One board so far. Each row counts what its page holds today.

BoardPlatformManual readDocument rowsDisagreements loggedNot statedObserved on my board
ASUS ROG STRIX B650-A GAMING WIFIAM5, AMD B650E20268, First Edition, September 202236 from the manual, 15 from the maker's web page8151 reading

What a board page is

A board page answers one question: if I fill these slots, what does the maker’s own documentation say still works? It has a slot map you can fill in, a lane table by processor family, and every statement the manual makes about slots, lanes and ports. Each statement is in my words, with the manual edition and the printed page beside it, so you can open the manual and check it.

Where the maker’s web page says something different from the manual, the page shows both and does not pick one. It also lists what the manual does not say, because silence in a manual is not a promise.

How boards are added

I add a board by reading its public manual and recording each statement with its page. I start with boards I own, because those are the ones I can also take readings on. A board I do not own can still be added from its manual. Its rows stay marked as manual only until an owner reports what theirs does.

Where each row comes from

Every row on a board page carries one of these badges, so a sentence from a manual never passes for a test.

Manual only
Printed in the user manual. Each row gives the edition and the printed page. Not bench-tested.
ASUS web specification
Printed on ASUS's specification page on the date I retrieved it. Not bench-tested.
Observed on my board
A reading I took on my own board, with the date, the BIOS version and the conditions.
Reader-reported
A reading sent in by an owner, with their BIOS version. None yet.

Ask for a board, or report what yours does

Both go to the same inbox. There is no form and no account.

Ask for a board

Send the exact model name as it is printed on the board or the box. A link to the manual on the maker's site helps, because the page is built from that document and nothing else.

Email contact@techfuelhq.com

Report what you observed

If you own a covered board, send the BIOS version, what was installed in which slot, and what you saw, with a BIOS screen, a device listing or a command's output. It goes on the board page as reader-reported, beside the document rows and never in place of them.

The contact page has the same address and says how corrections are handled.