Quick answer

Open Run with Win + R, type msinfo32, and read BaseBoard Manufacturer, BaseBoard Product, and BaseBoard Version under System Summary. In PowerShell, query Win32_BaseBoard; on Linux, run sudo dmidecode -t 2. Before downloading BIOS files or Wi-Fi drivers, inspect the physical PCB corner for REV 1.0 versus REV 1.2 markings.

Contents

At a glance

Class
Tutorial

Provenance

  • Nov 14, 2026Published

Close enough is wrong when identifying a motherboard. B650M-A, B650M-A WiFi, B650M-A II, and B650M-A WiFi II are four distinct support pages with incompatible BIOS images, and even two identical boxes can carry REV 1.0 versus REV 1.2 PCBs with completely different wireless chips soldered underneath the VRM shroud.

Software reads your model in five seconds when the PC boots. Physical PCB markings settle every edge case when software lies or the system will not POST.

SituationFastest MethodWhat It RevealsWhat It Can Miss
Windows 10 / 11 boots normallymsinfo32 (Win + R)Exact BaseBoard Manufacturer, Product, and VersionOEM placeholder strings (Default string) or unrecorded minor PCB revisions
Scripting or remote Windows shellPowerShell Get-CimInstance Win32_BaseBoardCopy-pasteable SMBIOS Type 2 fields including serial numberSame SMBIOS firmware string limits as msinfo32
Linux desktop, Proxmox, or live USBsudo dmidecode -t 2 or /sys/devices/virtual/dmi/id/Full SMBIOS Type 2 Baseboard table + BIOS version (-t 0)Requires reading physical silk-screen if vendor left DMI blank
OS broken, PC reaches UEFI screenReboot and press Del or F2Exact retail model string + installed BIOS version and build dateMinor Wi-Fi chip sub-revisions on certain boards
PC won’t POST or OEM DMI says To be filled by O.E.M.Tempered glass / side-panel visual inspectionSilk-screened model name + corner REV 1.x stamp + 24-pin barcode stickerNothing — the PCB stamp is ground truth

Method 1: Windows System Information (msinfo32)

No downloads are required on Windows 10 or Windows 11. Press Win + R to open the Run box, type msinfo32, and hit Enter.

Leave System Summary highlighted in the left pane and scan about halfway down the right-hand table for four adjacent rows:

  • BIOS Version/Date: Lists the vendor, current firmware revision, and compile date — save this before our safe BIOS update walkthrough so you know whether an update is even newer than what you run.
  • BaseBoard Manufacturer: The board maker (ASUSTeK COMPUTER INC., Micro-Star International Co., Ltd., Gigabyte Technology Co., Ltd., ASRock, or OEMs like Dell Inc. and HP).
  • BaseBoard Product: The exact model identifier (ROG STRIX B650-A GAMING WIFI, MAG B850 TOMAHAWK MAX WIFI, or an OEM code).
  • BaseBoard Version: Often reads Rev X.0x or 1.0, though some vendors leave a generic string here and print the real hardware revision only on the board itself.

Copy the exact BaseBoard Product string — every letter, dash, M (microATX), I (Mini-ITX), WIFI, and Roman numeral matters.

Method 2: PowerShell (Get-CimInstance Win32_BaseBoard)

Older forum guides still tell readers to run wmic baseboard get product,Manufacturer. On clean installations of current Windows 11 releases, wmic returns 'wmic' is not recognized because Microsoft removed the deprecated WMIC binary.

Use PowerShell’s native CIM cmdlet instead. Open Terminal or PowerShell (no Administrator elevation needed) and query Microsoft’s Win32_BaseBoard class via Get-CimInstance:

Get-CimInstance -ClassName Win32_BaseBoard | Select-Object Manufacturer, Product, Version, SerialNumber

If you want your current BIOS version and release date in the same terminal window, run one second query right underneath it:

Get-CimInstance -ClassName Win32_BIOS | Select-Object Manufacturer, SMBIOSBIOSVersion, ReleaseDate

I prefer the PowerShell route whenever I am helping someone remotely or documenting a build, because you can copy the exact text directly into a support search without transcribing 0 versus O from a screenshot.

Method 3: Linux and live USB (dmidecode and /sys/class/dmi)

Whether you run Ubuntu, Fedora, Proxmox VE, or booted a Linux live USB on a machine with a broken Windows install, Linux exposes the exact same SMBIOS Type 2 Baseboard structure straight from firmware.

With root privileges, run dmidecode filtered to DMI type 2 (Base Board Information):

sudo dmidecode -t 2

Want to check the board without sudo or on a minimal container host that lacks dmidecode? Read the kernel’s virtual DMI sysfs files directly as an ordinary user:

head -n 1 /sys/devices/virtual/dmi/id/board_vendor \
          /sys/devices/virtual/dmi/id/board_name \
          /sys/devices/virtual/dmi/id/board_version \
          /sys/devices/virtual/dmi/id/bios_version

Both commands pull from the same SMBIOS table populated at boot.

Method 4: Read the UEFI EZ Mode main screen

When an OS drive fails to boot, power on the PC and tap Del or F2 repeatedly as the monitor wakes up. Every retail board vendor prints the exact retail model name, installed BIOS build, processor, and DRAM capacity right across the top banner of its default UEFI EZ Mode screen, as shown in ASUS’s motherboard confirmation guide.

UEFI is immune to OS registry edits or broken Windows WMI repositories. Still, there is one hardware detail even UEFI sometimes hides: minor component swaps across PCB sub-revisions.

Method 5: Physical PCB silk-screen and why REV 1.0 vs REV 1.2 matters

Sometimes software prints useless vendor placeholders like System Product Name, To be filled by O.E.M., or Default string. Other times your desktop will not turn on or POST at all (if so, run through our no-power check order before ordering parts). And on Gigabyte, ASUS, and MSI Wi-Fi boards, a single retail model name routinely spans multiple hardware revisions.

Shut down the PC, flip the PSU switch off, and shine a phone flashlight through the side window (or remove the left panel). Check three physical spots:

  1. Center PCB silk-screen: Board makers print the model name in large white or silver ink between the CPU socket and the primary PCIe x16 graphics card slot, beneath the primary M.2 heatsink, or along the RAM slots. If a chunky GPU blocks your view, snap a zoomed smartphone photo angled upward beneath the GPU shroud before unscrewing anything.
  2. Barcode sticker near the 24-pin ATX header: As ASUS documents, a narrow white sticker alongside the 24-pin power connector or memory slots prints both the serial number and the exact model code.
  3. Bottom-left corner PCB revision stamp (REV: 1.0, REV: 1.1, REV: 1.2, REV 1.02): Look closely at the bottom-left edge near the rear audio jacks or front-panel audio header.

Do not treat that tiny REV number as trivia. During supply shifts, motherboard makers swap wireless M.2 cards between Intel AX210, MediaTek MT7922/MT7925/MT7927, Qualcomm QCNCM865, and Realtek RTL8852CE while keeping the exact same box name — ASUS’s ROG Strix X870-F Gaming WiFi specification page explicitly notes that Wi-Fi chipset models vary across board revisions (Qualcomm QCNCM865 or MediaTek MT7927). Gigabyte goes even further on many boards, maintaining completely separate BIOS download pages for rev. 1.0/1.1 versus rev. 1.2 or rev. 1.3. Grabbing the rev. 1.0 Wi-Fi installer on a rev. 1.2 board leaves you with zero internet during Windows 11 setup, and grabbing the wrong revision BIOS fails Q-Flash validation.

Decoding Dell, HP, Lenovo, and prebuilt OEM motherboards

If you own an Alienware, Dell OptiPlex/XPS, HP Omen/Victus/EliteDesk, or Lenovo Legion/ThinkCentre desktop, msinfo32 will show a short OEM board code instead of a retail ATX name:

  • Dell / Alienware: Six-character alphanumeric part codes starting with zero, such as 0X8DXD or 0R6JMP.
  • HP / Omen: Four-character hex System Board IDs (SSIDs) such as 89B5 or proprietary family names like HP Dorado.
  • Lenovo: Codes like 3753 or LENOVO SKYBAY.
  • CyberPowerPC / iBUYPOWER: Often use slightly modified retail ASUS, MSI, or ASRock boards carrying custom -CB, -B1, or -CEC suffixes (for example, B650M-C).

Important warning for boutique and big-box prebuilts: a board ending in -C or -CEC running custom OEM firmware will reject the standard retail board’s BIOS file in EZ Flash or M-Flash until you get the SI’s specific BIOS branch, and Dell/HP/Lenovo systems deliver motherboard BIOS updates exclusively by entering your chassis Service Tag or Serial Number on the system maker’s support portal.

Once you have your exact retail board model and revision written down, plug it into our NVMe expansion lane checker, AM5 ECC compatibility checker, or PC Builder compatibility tool to verify slot sharing and upgrade headroom before buying drives or memory.

Frequently asked questions

How do I find my motherboard model without opening my PC?
Press Win + R on Windows 10 or Windows 11, type msinfo32, and press Enter. Under System Summary, read BaseBoard Manufacturer, BaseBoard Product, and BaseBoard Version. You can also run Get-CimInstance Win32_BaseBoard in PowerShell or sudo dmidecode -t 2 on Linux to pull the same SMBIOS Type 2 fields in two seconds.
Why does BaseBoard Product or BaseBoard Version say To be filled by O.E.M.?
System Information and PowerShell read SMBIOS Type 2 strings programmed into firmware at the factory. Budget boards, older white-box motherboards, and custom OEM prebuilts sometimes leave BaseBoard Version or SerialNumber populated with placeholder text like To be filled by O.E.M. or Default string. When software returns placeholders, read the UEFI main screen at boot or inspect the physical silk-screen print on the PCB.
Why didn’t wmic baseboard get product work on Windows 11?
Microsoft deprecated and removed the legacy WMIC command-line tool from clean installations of current Windows 11 builds. Replace wmic baseboard commands with PowerShell’s CIM cmdlet: Get-CimInstance -ClassName Win32_BaseBoard | Select-Object Manufacturer, Product, Version, SerialNumber.
Why does motherboard PCB revision (REV 1.0 vs REV 1.2) matter?
Motherboard makers regularly keep the exact same retail box name while swapping onboard Wi-Fi/Bluetooth modules (between Intel, MediaTek, Qualcomm, or Realtek), audio codecs, or BIOS ROM layouts across PCB revisions. Downloading a REV 1.0 BIOS or Wi-Fi driver for a REV 1.2 board causes failed firmware checks or dead wireless adapters during clean Windows installs.
How do I look up a Dell, HP, or Lenovo prebuilt motherboard?
Big-box OEM desktops rarely use retail ATX boards. Their BaseBoard Product string shows an internal part code such as 0X8DXD (Dell) or a four-character SSID like 89B5 (HP). Enter your machine’s Service Tag or serial number on Dell, HP, or Lenovo’s support portal rather than searching retail motherboard sites, because OEM firmware updates ship by chassis model.

Sources and corrections

Last updated
Methodology
See our methodology for research and review standards. It draws on 7 cited sources, listed below, each checked against the original page on the date above. Commands and SMBIOS field definitions verified against Microsoft Learn documentation for msinfo32, Win32_BaseBoard, and Get-CimInstance, Debian’s dmidecode manual page, nongnu dmidecode project documentation, and ASUS motherboard identification and specification pages, read November 14, 2026.
Corrections
Spotted an error? Email a correction with the affected line and what you found. The draft includes this page’s address. Verified changes are recorded here. Contact details.

About the author

Written by Lowell K. Wood IV, who builds and runs TechFuelHQ from St. Louis, Missouri.